The drain is the usual suspect
An air conditioner removes moisture from the air, and that water has to leave the unit through a small pipe. Dust, algae and insect activity block that pipe over time, the tray fills, and water finds its way out of the casing and down the wall.
It is one of the cheapest faults to fix and one of the most expensive to ignore, because the damage is to ceilings, cornices and paint rather than to the machine.
When it is not the drain
A frozen evaporator will drip once it starts to thaw. That points at a dirty filter, low refrigerant charge or restricted airflow, and it will not be solved by clearing the drain alone. A unit that has been installed with a drain pipe running uphill, or with a pump that has quietly failed, will also drip regardless of how clean the line is.
In a badly installed unit, the drain relies on a small lift pump. Those fail, usually without warning, and often on a Friday. A gravity drain with real fall is the more reliable design.
What to do now
Switch the unit off, put a towel or bucket under it, and check the filter. Do not keep running it: a soaked tray will keep overflowing and the water is going somewhere.
If the filter is clean and the drip continues, it needs a visit. Ask for the drain to be cleared and, if there is a pump, for it to be checked rather than bypassed.
In short
- A blocked condensate drain is the most common cause, and the cheapest fix.
- A frozen coil points at airflow or refrigerant, not the drain.
- Gravity drainage with fall outlasts a small lift pump every time.