Commercial
Cold Room Installation & Repairs
A cold room is a building inside a building. Panels, door, drainage, defrost and airflow all have to agree, or the unit works twice as hard for half the result.
We design, build, repair and service walk-in cold rooms for takeaways, butcheries, caterers, crèches and small factories. That ranges from a room behind a kitchen that holds a day's stock to a proper chiller with a delivery door.
Most cold room calls come down to a short list: a door that no longer seals, a defrost cycle that has stopped completing so the coil gradually ices over, a drain heater that has failed and left water on the floor, or a condenser that has been starved of air since the day it was installed. Each has a proper fix. Each is far cheaper before the room loses temperature overnight with a full load inside. Where the room is in a converted garage or a back room with a covered yard, heat rejection is usually the constraint, and we would rather solve that than sell a bigger unit that will still run hot.
Sized on the load, not the floor
What is stored, how warm it arrives, and how often the door opens decide the equipment. A busy counter door changes the calculation completely.
Defrost and drainage designed in
Icing and blocked drains cause most cold room failures, and both are design decisions before they become maintenance problems.
Alarms that tell you first
Temperature alarms mean you hear about a problem at night instead of discovering it in the morning with a room full of stock.
What the work includes
- Cold room design, panels and door installation
- Panel, door and seal replacement on existing rooms
- Condensing unit and evaporator supply and repair
- Defrost system and drain heater repair
- Temperature alarms and monitoring
- Scheduled servicing for kitchens and stores
When to call us
- The room no longer holds temperature overnight
- Ice on the evaporator, ceiling or floor
- Water on the floor by the door
- The door no longer sits flush or the seal is torn
- The unit runs continuously in hot weather
Questions
Cold rooms, answered
Can you repair a cold room you did not build?
Yes, and that is most of the work. We assess panels, door, drainage and refrigeration separately, because the fault is often not in the part the client expected.
How much space does a cold room need?
The room itself needs less than people think; the plant and its airflow need more. We check delivery access, panel sizes and where the condenser can reject heat before quoting.
Why is there ice on the ceiling?
Usually warm, moist air getting in through a door or seal, or a defrost cycle that is not completing. Both need fixing at the cause rather than chipping ice off.
Do you offer maintenance for cold rooms?
Yes, on a quarterly or six-monthly schedule depending on use. For a room holding stock, that is usually the cheapest insurance on the site.
Related services
Freezer Room Installation & Repairs
Below-zero rooms built and repaired properly, with the drainage, defrost and alarms that keep a full room from thawing.
Read moreCommercial Refrigeration
Display fridges, prep counters, under-bar units and bottle coolers kept running for takeaways, butcheries, cafés and home businesses.
Read moreIce Machine Repairs & Servicing
Cube, flake and gourmet machines descaled, repaired and sized for the busiest service rather than the average day.
Read moreEdgemead, Monte Vista & Bothasig
Tell us what is happening in the room.
A call or a WhatsApp message with the symptom and the address is usually enough for us to tell you what kind of visit this is.
Enquiry tagged: Cold Room Installation & Repairs · Edgemead